Created by general-english-image-caption-clip on 2025-07-15

sketch of the original drawing.

Created by general-english-image-caption-blip on 2025-05-20

a photograph of a drawing of a drawing of a man's face

Created by gpt-4o-2024-11-20 on 2025-06-08

This image shows a rough hand-drawn technical sketch or design on paper, likely for a mechanical or structural component. It includes dimensions, annotations, and calculations.

• At the top, there is a rectangle labeled "140" with arrows and measurements written inside it. Distances of "100," "70," and "200" are marked with directional arrows indicating lengths or offsets. A notation near the center says "BUCA 6MM," likely referring to a 6mm hole ("buca" means "hole" in Italian).

• Below the rectangle is a larger horizontal rectangle, labeled "12MM" and "970." The numbers "3,867" and "2,280" are noted alongside a double arrow pointing horizontally, possibly referencing a calculation or total width.

• On the bottom left and right corners are curved elements, possibly depicting edges or structural features.

The paper is aged, with stains, creases, and two smaller holes punched at the bottom edge, suggesting it was stored or pinned in a file. It appears to be part of a rough design or engineering draft.

Created by gpt-4o-2024-08-06 on 2025-06-08

The image shows a piece of paper with technical sketches and handwritten measurements. There are two main sketches on the page:

1. The top sketch is a rectangle labeled with various measurements. The top of the rectangle has the number "140" above it and "200" to the right. Inside the rectangle, an arrow goes from the center upwards, marked "100", and another arrow goes downwards, also marked "100". An arrow pointing to the left is marked "70". To the bottom right, there's a label that says "BUCA 6MM", and to the left of the rectangle, "8 MM" is noted along the edge.

2. The bottom sketch is a larger rectangle with slightly curved edges. On the left side of this rectangle, a vertical line is labeled "12 MM." Inside it, numbers "970", "2,280", and a scribbled-over "3,262" are written.

The piece of paper has a vertical crease down the center, signs of wear such as stains and small tears, and two holes punched at the bottom. The drawings are done in blue ink, and the style suggests these are engineering or architectural measurements.

Created by anthropic.claude-3-haiku-20240307-v1:0 on 2025-06-13

The image appears to be a technical drawing or schematic. It contains various measurements and dimensions, as well as some labels and annotations. The drawing seems to depict some kind of mechanical or engineering-related object, but without more context, I cannot determine the specific nature of the object being represented.

Created by us.anthropic.claude-3-opus-20240229-v1:0 on 2025-06-13

The image shows a hand-drawn diagram on an aged piece of paper. The diagram depicts a rectangular shape, likely representing a room or space, with dimensions labeled as 140 cm by 200 cm. Inside the rectangle, there are some additional markings and measurements, possibly indicating the placement of objects or features within the space. At the bottom, there is a calculation showing the area of the space, which is 2,280 square units (likely square centimeters based on the dimensions given). The rough, sketched nature of the diagram suggests it may be a preliminary or conceptual layout for planning purposes.

Created by us.anthropic.claude-3-5-sonnet-20241022-v2:0 on 2025-06-13

This image shows a hand-drawn technical sketch or diagram with measurements. At the top, there's a rectangular shape with dimensions marked as "140" and "200", with some internal measurements of "70" and "100". The notation "8 мм" appears to indicate 8 millimeters.

Below this, there's another sketch with "12 мм" (12 millimeters) noted, and what appears to be a measurement of "170". At the bottom of the sketch, there's a number that reads "2,280".

The drawing appears to be done in blue ink on what looks like aged or yellowed paper. The sketches seem to be some kind of technical or construction drawings, possibly showing dimensions for a piece of furniture or architectural element.

Created by us.meta.llama3-2-11b-instruct-v1:0 on 2025-05-26

The image presents a hand-drawn diagram on a piece of paper, featuring two rectangles with measurements and labels. The diagram is likely used for educational or instructional purposes, providing a visual representation of the dimensions and relationships between the rectangles.

• Top Rectangle:
  • Dimensions: 140 mm x 200 mm
  • Labels: "140" (top), "200" (right), "70" (middle), and "100" (bottom)
  • Arrow: A vertical arrow pointing down from the top-left corner to the bottom-right corner
• Bottom Rectangle:
  • Dimensions: 970 mm x 2,280 mm
  • Labels: "970" (left), "2,280" (right), and "3,888" (middle)
  • Arrow: A horizontal arrow pointing right from the top-right corner to the bottom-right corner
• Additional Measurements:
  • 8 mm (top-left corner)
  • 12 mm (bottom-left corner)

The diagram provides a clear and concise visual representation of the rectangles' dimensions and relationships, making it an effective tool for educational or instructional purposes.

Created by us.meta.llama3-2-90b-instruct-v1:0 on 2025-05-26

This image depicts a piece of paper with handwritten notes and diagrams, likely created by an architect or designer. The paper is white, with a rough edge on the left side and three holes punched along the bottom. The handwriting is in black ink, with some words and numbers written in a foreign language.

The top-left corner features the number "8 MM" written in small letters, while the top-right corner has the text "BUCA 6 MM" accompanied by an arrow pointing to a rectangular shape. Below this, the number "200" is written, followed by another arrow pointing to a smaller rectangle with the dimensions "70 x 100" inside.

In the center of the page, a larger rectangle is drawn with the dimensions "12 MM x 970" written above it. Inside this rectangle, the numbers "3882" and "2,280" are written, along with some illegible text. A curved line is drawn below the rectangle, extending from the left edge of the page to the right edge.

Overall, the image appears to be a sketch or design plan for a building or structure, with various measurements and notes written throughout. The use of a foreign language suggests that the creator may have been from a non-English speaking country.

Created by amazon.nova-pro-v1:0 on 2025-05-26

The image shows a piece of paper with blue writing and drawings on it. There are two rectangles drawn on the paper, one with the number "140" and the other with the number "970." There are also some numbers written in the corners of the rectangles. On the right side of the paper, there is a drawing of a line with the number "200" written next to it.

Created by amazon.nova-lite-v1:0 on 2025-05-26

The image shows a page with handwritten notes and measurements. The top left corner has the text "8mm" and "140" written in blue ink. There is a square with the text "top" and "BUCA 6MM" written on it. Below that, there are numbers "70" and "200" written in blue ink. On the left side, there is a number "103" written in blue ink. The bottom left corner has the text "12MM" and "970" written in blue ink. There are some other numbers and text written in blue ink on the page.

Created by gemini-2.0-flash on 2025-04-29

The image is a hand-drawn sketch on a piece of paper, possibly a design or technical drawing. The paper has a few small tears along the left edge and two punched holes at the bottom right. The drawing is done with a blue pen and consists of rectangles and line diagrams, along with various handwritten notes and dimensions.

At the top of the page, the text "8MM" is written, followed by a rectangle with dimensions labeled as 140 and 200. Inside the rectangle, there's a small circle with dimensions indicating a distance of 70 from the side and 100 from the top, with the notation "BUCA 6MM" next to it.

Below this, "12MM" is written above a larger rectangle with dimensions 970 and "3883" written above "2280".

At the bottom left, there's a U-shaped diagram, and at the bottom right, there's an L-shaped diagram. Overall, the drawing appears to be a set of plans or measurements for some kind of construction or design project.

Created by gemini-2.0-flash-lite on 2025-04-29

Here's a description of the image:

The image is a hand-drawn sketch on a piece of aged paper. The paper has a slightly yellowed, worn appearance, suggesting it is old. There are three distinct sections in the sketch:

Top Section:

• A rectangular shape with dimensions labeled as 140 and 200.
• Markings indicate a hole labeled "BUCA 6 mm."
• Measurements of 100 and 70 are written near the hole, suggesting its position within the rectangle.
• Thickness is labeled "8 mm".

Middle Section:

• Another rectangle with dimensions labeled as 3,883, 2,280.
• The height is labeled "970".
• Thickness is labeled "12 mm".

Bottom Section:

• Two smaller sketches. One depicting a U-shaped structure with rounded corners. The second seems to be the profile of an L-shaped object.

The hand-drawn quality of the sketch and the annotations suggest that it might be a draft or preliminary design, possibly related to woodworking or construction. The use of dimensions indicates that it is meant to communicate sizes and proportions.

Created by us.mistral.pixtral-large-2502-v1:0 on 2025-05-27

The image appears to be a hand-drawn sketch or diagram on a piece of paper, likely related to some form of technical or engineering design. Here is a detailed summary of the contents:

1. Top Section:

   • There is a rectangular shape with dimensions labeled as 140 (likely millimeters) for the height and 8 mm for the thickness.
   • Inside the rectangle, there are several measurements and annotations:
     • A vertical measurement of 70 mm from the top to a point labeled "O".
     • A horizontal measurement of 70 mm from the left side to the point "O".
     • A vertical measurement of 100 mm from the bottom to the point "O".
     • A note indicating "Buca 6 mm" (which translates to "Hole 6 mm" in English) near the top right corner.
     • The number "200" is written to the right of the rectangle, possibly indicating another dimension or reference number.

2. Middle Section:

   • Another rectangular shape is drawn with a height labeled as 12 mm.
   • There are several measurements and annotations:
     • A vertical measurement of 970 mm from the top to a horizontal line.
     • A horizontal measurement of 3862 mm from the left side to a vertical line.
     • Another horizontal measurement of 2280 mm from the left side to another vertical line.

3. Bottom Section:

   • There are two curved lines drawn at the bottom left and right corners of the paper, which might represent some form of structural or design element.

The sketch seems to be a rough draft or a set of notes for a more detailed technical drawing or design, possibly for a mechanical or architectural project. The measurements and annotations suggest precise dimensions and placements for various elements.

Created by Qwen/Qwen2.5-VL-7B-Instruct on 2025-07-11

The image appears to be a hand-drawn diagram on a piece of paper, possibly for a technical or mechanical design. The drawing includes measurements and annotations in millimeters (mm). Here's a breakdown of what is visible:

1. Top Section:

   • A rectangle is drawn with labeled dimensions:
     • Width: 140 mm
     • Height: 100 mm
     • Depth/Thickness: 8 mm
   • There are annotations with arrows indicating a "BUCA" (which might be an abbreviation for a specific term or designation) of 6 mm and a "TOP" measurement of 70 mm.

2. Middle Section:

   • A longer rectangle is drawn with labeled dimensions:
     • Width: 12 mm
     • Length: 970 mm
   • There is a numerical value "3,286" and "2,280" written in the middle, along with an overlaid line indicating a section or cut.

3. Lower Section:

   • There are two U-shaped lines drawn, possibly representing bends or joints.

The overall appearance suggests that this is a technical sketch, possibly for a component in a larger assembly. The measurements and annotations are consistent with designs for machinery, electronics, or structural components.

Created by Qwen/Qwen2.5-VL-72B-Instruct on 2025-07-11

The image shows a hand-drawn technical sketch on a piece of paper, resembling a design for a mechanical part or assembly. The paper appears aged with some stains and marks. The drawing includes annotations and measurements in millimeters. Here are the details:

1. Top Section:

   • A rectangular shape with dimensions labeled "140" and "200" along the sides.
   • Inside the rectangle, there are two smaller lines with an arrow pointing downward labeled "top."
   • The word "BUCA 6MM" is written outside the rectangle, possibly indicating a 6mm hole or feature.
   • A small horizontal line is labeled "70," and a vertical line inside is labeled "100."

2. Bottom Section:

   • Another rectangular shape with a dimension labeled "970" on the left side.
   • Below the rectangle, there are two numbers written: "2,280" and "3,862," possibly indicating additional measurements or specifications.
   • The thickness "12 MM" is written to the left of this rectangle.

3. Additional Elements:

   • A small "8 MM" is written in the top left corner, possibly indicating a thickness or another dimension.
   • There are two vertical lines drawn at the bottom of the paper, possibly indicating further details or a continuation of the drawing.
   • The paper has three holes punched at the bottom, suggesting it might be part of a notebook or binder.

The overall appearance suggests this is a rough draft or initial sketch of a mechanical design, with various dimensions and features annotated for reference.