Created by gemini-2.0-flash on 2025-05-08

Here is a description of the image:

The image shows a hand-drawn design or sketch on a piece of paper, likely a technical drawing or a concept for a metal fabrication. The top left corner has the handwritten notes "FERRO - DOLCE NERO SPESSO - 10 MM" which translates to "IRON - SOFT BLACK THICKNESS - 10 MM", indicating the type and dimensions of the material to be used.

In the upper right corner, there is "PER CHRIS WILMARTH" followed by a circled number 3.

Below these notes, the focal point of the image is a rectangular sketch, labeled "TAGLIARE CON PINZE TORCHE" and "CUT OUT WITH TORCH" indicating the method for removing a central part of the material. The sketch shows a larger rectangle with a smaller rectangle cut out from its center, represented by dashed lines. Various measurements are provided in millimeters, such as "1200 MM" for the total length of the outer rectangle, "400 MM" for its height, and smaller dimensions like "75" and "50" near the cut-out section.

At the bottom of the image, there are written notes in English and Italian, stating "BOTH PIECES WILL BE USED", "ANCHE IL PEZZO TAGLIATO VERA USATO", "BOTH PIECES SHOULD BE STRAIGHT", and "TUTTI I DEE DEVONO ESSERE PERFETTAMENTE PIATTI". The translation of the Italian text is "Also the cut-out piece will be used" and "All sides must be perfectly flat." These notes suggest instructions or considerations for the fabrication process.

Created by gemini-2.0-flash-lite on 2025-05-08

This image is a technical drawing, likely a fabrication plan for a metal piece. The drawing is handwritten on a light-colored paper.

Here's a breakdown:

• Title/Header: "PER CHRIS WILMARTH" is written at the top right, with a circled "3" next to it. This likely indicates the project or order for a particular artist.
• Material and Dimensions: "FERRO - DOLCE NERO" (Iron - Mild Black) specifies the material. "SPESSO - 10 MM" (Thickness - 10mm) indicates the thickness.
• Diagram: The main part is a rectangular diagram with dimensions.
  • The outer dimensions of the rectangle are 1200mm x 400mm.
  • A dashed line is drawn within the rectangle indicating a cut-out.
  • Dimensions 75mm, 50mm are indicated along the perimeter of the cutout area.
  • "TAGLIARE CON PINZE TORCHE" and "CUT OUT WITH TORCH." instructs to cut the indicated shape using a torch.
• Instructions: Below the diagram, there are additional instructions, partially in English and Italian.
  • "BOTH PIECES WILL BE USED" emphasizes that both parts (the main rectangle and the cutout piece) will be used.
  • "ANCHE IL PEZZO TAGLIATO VERA USATO" (Also the cut piece will be used).
  • "BOTH PIECES SHOULD BE STRAIGHT" instructs to ensure straight edges after cutting.
  • "TUTTI I DEE DEVONO ESSERE PERFETTAMENTE PIATTI." (All should be perfectly flat). This emphasizes the importance of the flat surfaces.

In summary, the image is a technical drawing for a metal piece that is to be cut using a torch. The artist wants to preserve the cut out shape. The material is specified, along with instructions for the fabrication process.